1 Piece Buddy Cam Holder V2.1
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.23 – €1.50 net (excluding VAT)
For file: BuddyCamMount-Assembly V2.1 FINAL_0.4n_0.25mm_PLA_XLIS_59m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 59.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Quick update to the 1-piece remix of the buddy cam holder.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 52
- Makes
- 0
- Views
- 310
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the buddy cam mount by Karsten and found the 1 piece holder by timmmy to be a better solution for me. There were a couple things that I wanted to change for my own ease of use. I cleaned up some voids and remnants from the combination of the 2 original files. I also opened up the magnet holes slightly to allow for easier installation. They do require glue now to stay in place permanently. I also added the 90 degree lip as a feature so there is no need to bend or form after printing. The only supports needed are for the tabs and lock that engage with the buddy camera.