1 / 1
Remix of VFA Test Prusa Core One for Ankermake M5 — image 1

Remix of VFA Test Prusa Core One for Ankermake M5

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I edited the gcode file to run on my Ankermake M5 with all metal hot end

Rating
0 / 5
Likes
3
Downloads
9
Makes
0
Views
326
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Public Domain

I edited the gcode to turn the print cooling fan off by setting speeds commands to 0. I also set the print temps all to 250C for the Overture Easy Nylon filiament mfr recommendations. As you can see if you zoom into the print, it starts failing about 60 percent of the range. I have the Ankermake All Metal Hot End (now unavaliable as they've pulled it from production) with a steel .4 nozzle. Should work on a stock hot end as stock is rated to 260C. Stock brass nozzle will wear with this PA-CF filiament due to the carbon so recommend using a high temperature/hardened nozzle. Posted this for those working with more exotic filaments. I'm tuning my M5 to see if I can print this Nylon variant.

Tags