WACCA Expanded Coin Rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement coin rail for Wacca that accepts coins larger than the 100 yen coin
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Public Domain
This is a replacement coin rail for the WACCA rhythm game arcade cabinet to allow for coins larger than the 100 yen coin to pass through.
Print the model with the flat side with the screw holes against the build plate.
To install this part, start by removing the “chin”, or the headphone amp / card reader / coin slot plate. Remove the existing metal coin rail. If needed, file the coin slot wider using a metal file so that the coin slot can fit larger coins. Once your desired coin can pass through the slot, mount the expanded coin slot where the old metal coin rail was. Tighten the nuts down and reinstall the chin once you've installed your new coin acceptor.
Printing in PETG is recommended so that the part can last in an arcade environment where thousands of coins are entering through the slot. PLA should also be ok, but may require increased strength settings.