1 / 8
Kappschiene Winkelanschlag Güde TS 57 Führungsschiene // Cross-Cut Rails Angle Stop for Güde TS 57 Guide rail — image 1
1 / 8

Kappschiene Winkelanschlag Güde TS 57 Führungsschiene // Cross-Cut Rails Angle Stop for Güde TS 57 Guide rail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

90° Winkelanschlag/Kappschiene für Güde TS 57 Führungsschiene // 90° Cross-Cut Rail Angle Stop for Güde TS 57 Guide rail

Rating
5 / 5
Likes
6
Downloads
30
Makes
1
Views
323
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Winkelanschlag für Tauchsäge Güde TS 57 Führungsschienen

  • Als 90°-Anschlag zum Kappen
  • Arretierbar

Materialbedarf: 2x M6-Mutter und 2x M6 Schraube (mit Sternknopf oder ähnliches)

Auf meinem Drucker kam es sehr “tight fit” raus, so dass der Winkel nicht in der Schiene wackelt und fast kein Spiel hat. Ich komme auf einen Winkel von 89,8° was für meine Zwecke vollkommen reicht (Abweichung kann am Druck, an der Schiene selbst oder auch an beidem liegen).

============================

Angle Stop for Track Saw Güde TS 57 Guide rails

  • As 90° stop for cross-cutting
  • Lockable

Material required: 2x M6 nuts and 2x M6 screw (with star knob or similar)

On my printer it came out very “tight fit”, so that the bracket does not wobble in the rail and has almost no play. I achieved an angle of 89.8°, which is perfectly sufficient for my purposes (deviation may be due to the print, the rail itself or both).

 

Tags