1 / 4
Ear Plug Box | Print in Place
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ear Plug Box with rotating chamber | Print in Place
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 36
- Makes
- 3
- Views
- 240
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ear Plug Box with rotating chamber. The tubes are hold in position by a little pin. To rotate the tubes you need to push the pin away. To push the pin away you can push in the cut out part of the cap.
Both tube are connected by a 0.3mm line. This needs to be seperated before using. Just use a knife to push away the line and seperate the tubes.
When oriented on the cap, the box can be printed without support.