1 / 1
Dragon Ball Super - Broly - Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Broly PrusaSlicer version
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 39
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA Black
- ERYONE PLA Filament Green
- Polymaker PolyTerra PLA Savannah Yellow
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #10 (0.88mm) swap to Green
- At layer #14 (1.2mm) swap to Yellow
- At layer #19 (1.6mm) swap to White for the rest.