1 / 1
DBS - Gogeta blue - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dragon Ball Super Gogeta Blue
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 19
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
- Nozzle diameter: 0.6
Filaments Used:
- Polymaker PolyTerra PLA Black
- Polymaker PolyTerra PLA Blue
- Polymaker PolyTerra PLA Yellow
- Polymaker PolyTerra PLA Red
- Polymaker PolyTerra PLA White
Swap Instructions:
- Start with Black
- At layer #8 (0.72mm) swap to Blue
- At layer #13 (1.12mm) swap to Yellow
- At layer #16 (1.36mm) swap to Red
- At layer #18 (1.52mm) swap to White
- At layer #19 (1.6mm) swap to Yellow
- At layer #20 (1.68mm) swap to White for the rest.