toniebox holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate for Toniebox charger, for selfmade shelfs. Only a diameter of 10cm has to be cutout in any plate.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 82
- Makes
- 0
- Views
- 859
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- GNU General Public License v3.0
The original Toniebox charger fits into the holder.
Only a raw outbreak of 10cm diameter has to be cutout of any mounting plate. The Holder can be fixed with four sunk screws (max. M3) or glued.
A cable cutout is prefabed for nice cable manegment and the mains adapter fits through the inner cutout.
The charger fits a little bit tight in the holder but that is necessary, so the Tonie box don't lifts up the charger.
my praxsis checked printer settings:
Material: PLA
System preset: 0.20mm Quallity
Infill: Honeycomb 15%
Supports: Support on build plate only
Position: reduction screws on build plate (see photo)
Used Filament: 12.11m
Estimated print time: 2h51min
Happy Printing