1 / 3
Polaroid/Instax Mini wall guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 3D-printed tool helps align Polaroid/Instax Mini photos with an 8mm gap between them.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This 3D-printed tool helps align Polaroid/Instax Mini photos with an 8mm gap between them. It includes a slot for a 15mm x 15mm x 40mm level for precise positioning. Simply place a mounting square (e.g., Scotch mounting squares) on the back of the photo, insert it into the slot, and position it on the wall. Once aligned, press the photo onto the wall and slide the tool off, leaving the picture securely mounted.
To hold the level in place you can either glue it or just put a piece of scotch tape on top. Up to you.