LDO Voron Trident Flex Plate Stops
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flex Plate Stops to suit the print bed that ships with the LDO Voron Kits
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 72
- Makes
- 1
- Views
- 701
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Flex Plate Stops to suit the print bed that ships with the LDO Voron Trident Kits
Print 2 of them in ABS or other heat resistant filament. Insert heat set inserts in each side of the print. Drop into the cut outs in the rear of the heat bed and secure from underneath the bed with M3x10 screw and then place M3x6 Flat Head Screws from the top in the rear threaded inserts.
Using the Flathead screws they should sit just below or flush with the top of the flex plate so the nozzle can't accidentally hit the screw heads.
22/03/2025 - Added Version 2 that will clear Box Armoured Turtle Brush Holder doesn't require flathead screws to hold the sheet.
BOM:
4 x M3x5x4 Threaded Heat Set Inserts
2 x M3x10 Hex Socket Head Cap Screws
2 x M3x6 Hex Socket Flat Head Screws