Fluke 87 Voltmeter Pegboard Mount with Probe Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.71 – €3.31 net (excluding VAT)
For file: Fluke 87 Pegboard Mount-BodyLowerFillet_0.3mm_PETG_MK3S_2h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.01 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 2.58 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A mount to hold your larger size Fluke voltmeter to standard pegboard. Included integrated probe holder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 42
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I found most of the models out there didn't fit the width of my Fluke 87 meter so I made my own. I decided to use standard ½" metal J-hooks to attach to the pegboard as I didn't want the printed ones to break off and drop my meter. This is sturdy enough that I can use the meter on the pegboard without removing it.
I made it out of PETG with minimal supports but you can slice it for PLA if you want.