1 / 1
Inkplate 5 Rev. 2 Case and Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2-in-1 case and stand for Inkplate 5 Rev. 2
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 40
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
2-in-1 case and stand for Inkplate 5 Rev. 2.
I recommend printing the “foot_base” with 100% infill to add weight. Weight is the same reason I chose to use long screws with heat inserts in the base.
Parts needed:
- x2 M3x12 Screws, preferably with low head (2.4mm)
- x2 M3x14 Screws, preferably with low head (2.4mm)
- x4 M4x35 Screws with low head (3.1mm)
- x4 M4 Heat inserts
Don't use M3x14 at the top, you can damage the screen!