1 / 1
Bleach - Ichigo - Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used
- Polymaker PolyTerra PLA Black
- Polymaker PolyTerra PLA Orange
- Polymaker PolyTerra PLA Cotton White
Swap Instructions
- Start with Black
- At layer #5 (0.88mm) swap to Red
- At layer #13 (1.12mm) swap to Grey
- At layer #18 (1.52mm) swap to White for the rest.