Hercules DJ Console MK4 Rack 19" Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.27 – €1.56 net (excluding VAT)
For file: djcmk4_02_0.4n_0.2mm_PLA_MK4S_1h9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.41 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.16 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Rack mixer 19" adapter for Hercules DJ Console MK4
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Install your DJ Console MK4 in a 19" mixer rack
Detail for printing the different parts:
PLA / PLA+
Nozzle 0.4mm
Layer height 0.2mm
Filling 15%
No supports!
Additional material:
4x M4x20mm screws
4x M4 nuts
2x rod diam. 8mm length 440mm (tube or round (aluminum, stainless steel or steel) or threaded rod (stainless steel or steel))
Printable parts:
Left Frame --> DJCMK4_01
Pause at 32.8mm to place 2x M4 nuts
Right Frame --> DJCMK4_01S
Pause at 32.8mm to place 2x M4 nuts
2x Supports --> DJCMIX_02
***************************************************
Installez votre DJ Console MK4 dans un rack mixer 19"
Détail pour impression des différentes parties :
PLA / PLA+
Buse 0.4mm
Hauteur de couche 0.2mm
Remplissage 15%
Pas de supports !
Matériel supplémentaire :
4x vis M4x20mm
4x écrous M4
2x tige diam. 8mm longueur 440mm (tube ou rond (aluminium, inox ou acier) ou tige filetée (inox ou acier))
Pièces imprimables :
Montant Gauche --> DJCMK4_01
Pause à 32.8mm pour placer 2 écrous M4
Montant Droit --> DJCMK4_01S
Pause à 32.8mm pour placer 2 écrous M4
2x Supports --> DJCMIX_02