1 / 2
27mm Gas Bottle Wrench
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to fit 11kg gas bottle widely used in Poland
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 106
- Makes
- 3
- Views
- 379
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Material: PLA (you don't want it flexing, so don't use PETG, etc. it will be worse)
Perimeters: 7
Infill: Gyroid, 7%
Tips:
- Flip it upside down, text down on the print bed, it'll look nicer
- For more strength print it hotter than usual starting from the 2nd layer, I went 10C higher
- Use a single perimeter for the 1st and top layers, it'll look nicer (or just start from my 3mf, it has it setup already)