ProLight 1000 Inteletec CNC Dust Boot - UPDATED 7-25
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mostly 3D printed, light and vacuum boot for ProLight 1000 CNC
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a dust boot for the ProLight 1000 CNC, it bolts over the front and holds a mist coolant nozzle as well as a light ring.
The main flat piece is meant to be steel, it can be plasma cut before being counter bored or countersunk afterwards, or it can be milled if you have the build area, it is slightly to large for the ProLight 1000. Steel is used because a magnetic base of a dial indicator or mist coolant system can be attached
The Majority of the rest can be any filament but the end cover should be clear to allow light through if you are using the light ring.
The top piece of plastic is what holds the boot to the CNC, by replacing the two front most 10-32 bolts with new longer ones it can securely hold that piece, where the front panel can then be bolted to it.
It is designed for this light ring:
https://www.adafruit.com/product/4433
And this mist coolant system (assuming they haven't changed it, the large two brass knob on black manifold variety has the designed hole placement)
And these m8 threaded inserts:
https://www.mcmaster.com/90742A134
And lastly fits a 2.5" vacuum hose
The two clear pieces are held together with coarse thread m3 SHCS (these funky things):
https://www.aliexpress.us/item/3256803433053868.html?spm=a2g0o.productlist.main.2.372a7dabQwnQrA&algo_pvid=b8aec1ee-23de-4a12-98fd-52e49f141de7&algo_exp_id=b8aec1ee-23de-4a12-98fd-52e49f141de7-1&pdp_ext_f=%7B%22order%22%3A%22758%22%2C%22eval%22%3A%221%22%7D&pdp_npi=4%40dis%21USD%211.11%210.99%21%21%211.11%210.99%21%40210318c317403668922877525e241a%2112000026522596574%21sea%21US%210%21ABX&curPageLogUid=f1iAudBfqd0y&utparam-url=scene%3Asearch%7Cquery_from%3A
The rest is standard m3 bolts, washers, and heat set inserts, as well as m8 bolts.
My set is from Nindejin on Aliexpress, but should be standard sizes, the heat set inserts are also a generic aliexpress set, and the m8 bolts were brass one offs also from aliexpress.
7-25 Update
I have added a support piece that attached behind the top left face plate bolt to hold up the vacuum tube so that it doesn't stress the tube it attaches to.