Universal Hangar Hook
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.77 – €2.17 net (excluding VAT)
For file: Univeral Hangar hooks v2_0.6n_0.32mm_PLA_XL_1h20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.97 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 1.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A easily printable fat hook hangar for mounting to just about anything with a 3m command strip or flathead nail/screw
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal hangar hook. can be used for hanging just about anything, off just about anything else. have included several versions with nail holes but can just as easily be held by command strips. Also included is a v design for hanging pictures.
I have included print file from my XL of the two variants but you could just as easily print them on anything else. its not a complex model so most settings will work. I would advise printing them on their side as opposed to their back, purely to ensure the weight is distributed perpendicular to the print layers