1 / 2
Separate tonometer holder B.Well on the countertop 16mm.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a separate version of the tonometer holder to the table 16mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Instruction manual
PETG. 3 walls. Bolt M6x25mm. The clamp holds well, it needs 4 layers and 35% filling, with supports. Thread the thread with an M6 tap, after printing the bolt is tight. Support is needed. The case printed diagonally across the table. There are 4 layers at the bottom and top. Wall 2 pcs. Filling in 25. . After removing the supports, insert a small insert into the clamp so that the bolt does not crumple the tongue and rests against the insert.