1 / 1
Magnetic bit screwdriver with print-in-place freewheel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic bit screwdriver with print-in-place freewheel with 6x2mm magnets
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
Changed the magnet from the original model to use 2 6x2mm and added a small lip that keeps the freewheel knob at the end in place during print. Needs to be cut with a knife after printing.
Print with the bit side down on the print bed. I used PETG with a brim and the print was fine. Just press in the magnets after printing.
