Modular Cricut Vinyl Storage/Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top, Middle and Bottom Interlocking Organizers for Vinyl rolls.
- Rating
- 5 / 5
- Likes
- 369
- Downloads
- 927
- Makes
- 10
- Views
- 4,555
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: Jan 19th - Got rid of the aligner tabs, they served no major benefit to the design and overlaps should be more than sufficient.
Modular wall mounted vinyl/rolls storage for Cricut, Scisor or any other brand.
Print only the Top and Bottom x2 for a complete set, print the Middle for an additional 2 racks, but add as many Middles as you want. Parts interlock loosely to help with alignment and mounting, but are not intended to be a snap fit so don't worry too much about printer tolerance. Glue if desired, or just screw through the combined sections to hold them together against the wall.
Bottom part features a small hanger tab for hanging Cricut Mats, make sure this is supported for successful printing.
Printing:
Turn off Skirt to fit on Mini build plate without issue, but recommending using a 2mm minimum Brim to fit on Prusa Mini as the parts are fairly thin and may need some help with adhesion.
Printable on Prusa Mini+
Recommend using 20% infill and 0.6mm nozzle.