1 / 3
Tandy 1000 HX Expansion Bay Top Cover — image 1
1 / 3

Tandy 1000 HX Expansion Bay Top Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reproduction Tandy 1000 HX top cover, created using an original EX cover and HX cover photographs for reference.

Rating
0 / 5
Likes
1
Downloads
9
Makes
1
Views
38
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Also available on MakerWorld with profiles for Bambu printers.

I created this by first using a real Tandy 1000 EX cover for reference. I then used measurements from my HX PC and referenced detailed photos kindly provided by Michael Pittsley to apply the differences between the EX and HX covers.

I endeavoured to make this an accurate reproduction. I made one deviation by adding a small chamfer to the front lip. Otherwise, a small protrusion on the PC will interfere with the cover latching fully. This is likely why so many HX's are missing their original cover.

The smooth curve at the back of the cover does make it challenging to print. I have provided three variants of the model:

  • One which limits the overhang to 45 degrees. I used this quite a bit with my fit testing print and was reliable and clean to print. The fact that it is not as round as the original does bug me though.
  • A second with only a 20 degree overhang. This must be printed with lowest possible layer height and likely still won't be as clean as the version with 45 degree overhang. I do personally still prefer the more rounded edge from this model.
  • A third with accurate, fully rounded curve. This can't really be printed cleanly on non-commercial printers.  

I have included variations of raw model files as well as the Fusion CAD file if you would like to experiment more yourself.

Note: I print a the a second "vase” model on the plate at the same time as a solution to getting a print profile with clean prints. Otherwise there will be some quality issues related to insufficient cooling towards the end of the print.

The EX version is available here.

Tags