Prusa Mini+ LCD mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.76 – €0.93 net (excluding VAT)
For file: Prusa Mini+ LCD mount, 02-25-2025_0.4n_0.2mm_PLA_MINIIS_49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.84 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 49.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A mounting bracket for the mini+ LCD box. It attaches to the aluminum extrusion of the Y axis.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 2
- Views
- 237
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a second hand Prusa Mini+ and the LCD could not stand up on its own. Upon further inspection, I found the reason was because the injection molded front end of the Y-axis was stripped out where the LCD attaches.
This bracket solves that problem by bypassing the injection molded part and mounting the LCD directly to the aluminum extrusion.
Some supports required.
Hardware:
- M4 x 12mm
- M4 T-Nut