1 / 5
Artis3D feeder Type MK Version 2 - Filament Runout Sensor end Filament Cutter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model has been modified for filament cutter and some parts have been thickened to increase strength.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 93
- Makes
- 0
- Views
- 1,362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This model has been modified for filament cutter and some parts have been thickened to increase strength.
It is not compatible with the stock K1 motor.
It is highly recommended to print it in ASA-CF, PC-CF or better .
Bill of material:
- 1x microswitch : Omron D2F-FL or D2F-L
- 7x M3x4 OD5 Heat Inserts
- 5 x M3x10 Screw
- 1 x M3X12 Screw
- 1 x 4mm steel balls (You can find inside a 608 bearing)
- 1 x 9mm snap off blades 60 Degree
- 1 x Bowde ECAS04 Teflo Pneumatic Fitting
- 1 x Pen springs