Emsa Bottle Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.71 – €0.87 net (excluding VAT)
For file: minimal-support-Flaschendeckel-1.0_0.4n_0.2mm_PLA_MK4S_47m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.79 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 46.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement cap for Emsa bottles in various designs.
- Rating
- 4 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 1
- Views
- 93
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
My kids take these Emsa bottles to scool. Unfortunately some caps broke. So I decided to print a replacement. I designed one cap close to the original and one with a crown for my little princesses.
I printed them upside down with a 45° angle for the bottle joint to be printed durable. Other orientations might be fine also. Printing in original orientation will provide a smoother surface but also needs a lot of support.
If you need other file formats, have questions or design wishes let me know.
I love to see some makes from you.
Edit:
Original orientation / beautiful surface needs 3 g more of filament then the minimal support one. Despite using more material the beautiful surface also prints faster.