1 / 4
Case with lid for RPi 5 + SSD kit + UPS Suptronics X1200
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ventilated case with lid for RPi 5 + SSD kit + UPS Suptronics X1200
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
- case with cover for RPi 5 + genuine SSD kit (HAT+ on top) + UPS Suptronics X1200 (underneath RPi)
- printed startup button on the UPS (you'll have to cut out printed supports)
- no screws, RPi placed on dedicated islands, lid just placed on the case with a small overlap
- two versions:
- accessible only the USB C power supply connector on the X1200
- all connectors accessible (RPi: USB C, 2x microHDMI; X1200: USB C)
- PLA not recommended for temperatures above 50°C
- wall thickness adapted for 0.4mm nozzle and 0.2mm layer
PS: This case is not optimized to make all the status LEDs clearly visible from the outside, but you can find the right angle to see each one.