Replica Suppressor for Working Glock-18 Replica from CSGO/CS2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replica Suppressor for the Glock-18 Replica by Aurele_05
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 235
- Makes
- 0
- Views
- 3,716
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replica Glock-18 found here → Click Me
The suppressor isn't modeled after any specific IRL suppressors. It's meant to be simple.
Installation:
Slide the suppressor into the barrel. The side with the rifling will go into the barrel and use friction to lock itself into place. The tolerances are a little tight but it will go in. To remove it the first time you may need to shove something into the other side of the barrel to pull off the suppressor. The suppressor should come off easier after a few times doing this.
Failure Point:
You can print the suppressor vertically but it won't be as strong as printed horizontally. The major failure point is where the suppressor and adapter meet. I broke mine installing it but some Gorilla super glue fixed that issue.
All models are man-made; no AI was used.