Monolith calibration cube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibration cube inspired from monolith gantry
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 155
- Makes
- 2
- Views
- 392
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable calibration cube designed and taken inspiration from the Monolith gantry project
If the calibrations below come out perfect, you are ready to start your monolith gantry!
Features:
- Bottom hole fit F695/F698 bearing and the cap should close
- Top hole fit (F)695/(F)698 bearing
- Recessed logo is 2.5mm deep, allows checking for grubscrew length
- Top and bottom of flat side used to check ringing and vfa
- Bridging test in the center
- 20-30 deg overhangs on the logo
- Hidden easter egg
Recommended print settings:
- Per monolith recommendation
Recommended materials:
- Per monolith recommendation
Changelog:
| Official release | Changes |
|---|---|
v2 26th Feb 2025 | First official release |