1 / 3
Bugasalt 3.0 Wurkkos HD01 holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed an angled flashlight/laser mount for mounting the Wurkkos HD 01 onto the bugasalt v3.0
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Share Alike
I designed a simple attachment mount for securing a Wurkkos HD01 flashlight/laser pointer onto a Bug-A-Salt v3.0 salt blaster. The mount is angled 1.5 degrees upwards, so in theory, the laser should align at 2 feet from the muzzle.
🔹 Fit & Print Settings:
- Printed in PETG at 260°C, resulting in a perfect snug fit.
- Other print settings shouldn't matter much.
🔹 Installation:
- Remove the belt clip and reinstall the three T6 Torx screws.
- Insert the mount with the laser side up and charge port down for best alignment.
- It can be inserted both ways if the laser is misaligned.
🔹 Note:
The Wurkkos HD01 laser in my case is terribly misaligned and points slightly to the side. This mount should help correct that to some extent.