10 Inch Grass Barrier Landscape Edging Brackets for corner end connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corner bracket and connector bracket for 10" depth, 1/10" (2.5mm) Grass Barrier landscape edging. Uses 1/4" hardware.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 30
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I use some heavy duty Grass Barrier 10" landscape edging in the landscaping at our home. It's a bit expensive, but it works great, stays in place really well and being so deep it prevents pretty much anything short of a tree or bush from getting roots through. I designed these brackets to make cleaner corners around certain features. You can theoretically fit other types of landscape edging in these brackets, assuming a max width of 1/10" or 2.5mm. Forgive the pictures above, I had to uncover the brackets a bit to show them off.
Making a corner uses 2 brackets per corner for the Grass Barrier linked above for a total depth of 10". For each bracket, you will need 4 ¼" or M6 bolts with matching washers and nuts and will need to line up and drill holes in the edging to affix the brackets. Each connector requires 3 bolts and matching hardware.
Make sure your materials are rated for where you're putting them! Print these out of ASA or a similarly outdoor-rated material and use similarly rated mounting hardware to ensure things don't fall apart. Done well, these will last practically indefinitely.