SmartThings Button Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mountable plate designed to hole a SmartThings button.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A wall mountable plate designed to hold a SmartThings button.
Remixed from:
https://www.thingiverse.com/thing:3827965 and https://www.thingiverse.com/thing:5128845
Print with the show face on the bed, supports are not required if you have your bridge settings dialed in, otherwise use supports only in the area where the SmartThings button will mount. Use the double sided tape included with the button or other thin double sided tape to secure the device into the wall plate. Mount to the wall with two screws. It does not need to be mounted to an electrical box.
Included are files to print at 0.3mm layer height and 0.2mm layer height.