1 / 6
STLINK V3MINIE robust case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Robust case for STLINK V3MINIE programmer.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 93
- Makes
- 3
- Views
- 452
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The case is easy to print and requires 4pcs of M2.5 x 12mm screws (link) and 10pin 2x5 connector (I used an old one from a fake and useless stlink v2, but here you can buy a new one: link). With this type of connector soldered to the board, Dupont cables can be easily connected to the programmer (link).