1 / 9
Upcycling Idea: Self-Watering Flower Vase or Plant Pot from Old Glass or Spice Jar — image 1
1 / 9

Upcycling Idea: Self-Watering Flower Vase or Plant Pot from Old Glass or Spice Jar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Self-watering flower vase made from spice Jar, prevents mold growth and is environmentally friendly.

Rating
0 / 5
Likes
8
Downloads
26
Makes
0
Views
342
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

EN:
I had an idea about how to make something useful out of old spice jars: self-watering flower vases for outdoor use. In doing so, I wanted to solve a common problem.

The Problem with Many Self-Watering Pots

With many self-watering pots, too much water often gets into the soil. This then leads to mold and other problems. I wanted to avoid this at all costs.

My Idea

My vase should be different:

It waters itself without flooding the soil.

You can see how much water is still inside.

It looks modern.

It can be easily produced with a 3D printer.

Instructions: Self-Watering Vase from a Spice Jar

Step 1: Preparing the Spice Jar

Remove the lid and all labels from the spice jar.

If necessary, use rubbing alcohol or a similar solvent to remove any adhesive residue.

Step 2: Preparing the Strings

Cut several strings to a length of approximately 50 cm (20 inches).

The number of strings should correspond to how many can fit through the hole in the lid.

Step 3: Threading the Strings

Use a toothpick to thread the strings through the hole in the lid.

Let the strings hang down far enough to touch the bottom of the spice jar.

Step 4: Placing the Jar

Insert the prepared spice jar into the vase.

Step 5: Attaching the Lid

Place the lid with the threaded strings onto the vase.

Step 6: Arranging the Strings

Guide the strings that protrude from the lid through the loop.

Arrange the strings in a ring on the bottom of the vase.

Step 7: Finishing Up

Carefully fill the vase with soil.

You can fill the spice jar with water through the opening in the lid.

When filling, pay attention to the indicator on the outside of the jar.

For the finishing touch on my project, I activated the "Fuzzy Skin" option. This gives the entire piece an appealing surface texture.

I'd love to hear your feedback! If you have any questions or additional ideas, please don't hesitate to share them. Your suggestions are always welcome.


DE:
Ich hatte eine Idee, wie man aus alten Gewürzgläsern etwas Nützliches machen kann: selbstbewässernde Blumenvasen für draußen. Dabei wollte ich ein häufiges Problem lösen.

Das Problem mit vielen selbstbewässernden Töpfen

Bei vielen selbstbewässernden Töpfen kommt oft zu viel Wasser in die Erde. Das führt dann zu Schimmel und anderen Problemen. Das wollte ich unbedingt vermeiden.

Meine Idee

Meine Vase sollte anders sein:

Sie bewässert sich selbst, ohne die Erde zu überschwemmen.

Man kann sehen, wie viel Wasser noch drin ist.

Sie sieht modern aus.

Man kann sie leicht mit einem 3D-Drucker herstellen.

Anleitung: Selbstbewässernde Vase aus einem Gewürzglas

Schritt 1: Vorbereitung des Gewürzglases

Entfernen Sie den Deckel und alle Aufkleber vom Gewürzglas.

Falls nötig, verwenden Sie Spiritus oder ein ähnliches Lösungsmittel, um Klebereste zu entfernen.

Schritt 2: Vorbereitung der Schnüre

Schneiden Sie mehrere Schnüre auf eine Länge von ca. 50 cm zu.

Die Anzahl der Schnüre sollte der Menge entsprechen, die durch das Loch im Deckel passt.

Schritt 3: Einfädeln der Schnüre

Verwenden Sie einen Zahnstocher, um die Schnüre durch das Loch im Deckel zu fädeln.

Lassen Sie die Schnüre so weit heraushängen, dass sie den Boden des Gewürzglases berühren.

Schritt 4: Platzierung des Glases

Setzen Sie das vorbereitete Gewürzglas in die Vase ein.

Schritt 5: Anbringen des Deckels

Setzen Sie den Deckel mit den eingefädelten Schnüren auf die Vase.

Schritt 6: Anordnung der Schnüre

Führen Sie die aus dem Deckel herausragenden Schnüre durch die Schlaufe.

Legen Sie die Schnüre in einem Ring auf dem Boden der Vase aus.

Schritt 7: Fertigstellung

Befüllen Sie die Vase vorsichtig mit Erde.

Durch die Öffnung im Deckel können Sie das Gewürzglas mit Wasser befüllen.

Achten Sie beim Befüllen auf die Anzeige an der Außenseite des Glases.

Für den finalen Schliff meines Projekts habe ich die "Fuzzy Skin"-Option aktiviert. Das verleiht dem Ganzen eine ansprechende Oberflächentextur.

Ich freue mich über euer Feedback! Falls ihr Fragen habt oder weitere Ideen einbringen möchtet, lasst es mich gerne wissen. Eure Anregungen sind jederzeit willkommen.

Tags