1 / 3
IKEA Vigda Curtain Rails Connector with Threaded Inserts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connects two IKEA Vigda curtain rails with M3x10mm set screws and threaded inserts
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 19
- Makes
- 1
- Views
- 223
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a connector for aligning Vigda rails so that you can easily slide curtains along the tracks. I used threaded inserts to make it easier to have a set bolt on each side. If your rails connect where there is also an overhead fastener for hanging the rails, you want this version of the connector with a slot.
Print Settings
Material: PETG
Infill: 60% Gyroid
Suggested Orientation: -90deg along x-axis (print with MK3 on top)
Screw details
Set Screws: M3x10mm (x2)
Inserts: M3x5.7mm - I use these from CNC Kitchen