Lack Enclosure Latch C270 Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple adapter for mounting a Logitech C270 webcam behind the latch of your lack enclosure using minimal hardware
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 17
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This simple remix of the Prusa Enclosure Door Knob's latch allows you to mount a Logitech C270 webcam (or any webcam with a 7.1mm rotation shaft) behind your latch for nice overview shots of your print bed.
The only hardware required is 1" long #4 machine screw that thread into the plastic (an M3 x 25mm screw should also work)
I've included a few variations and adapters, as well as a few simple cable management hooks.
Latch Variations:
- Latch Mount Centered - mount is centered behind the latch (the lens will be offset)
- Latch Mount with Lens Offset - mount is offset behind the latch in order to center the webcam's lens
Adapters/Extensions:
- Right Angle Adapter: adapter which turns the webcam at a right angle for vertical photos/videos
- Lens Offset Adapter: adapter which shifts the webcam in order to center the lens (e.g. if you used the Latch Mount Centered & wanted to center the lens
- Distance Adapter 0.5inch: adapter which gives you ½" (12.7mm) of distance from the mount
Cable Management Hooks (with mirrored versions for either side):
- Screwed Cord Hook Addon: Cord hook reuses one of the latch screws by fitting over that side of the latch
- Screwed Cord Hook: Cord hook which can be screwed onto your lack