Squish fidget UPDATED large
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.32 – €1.61 net (excluding VAT)
For file: Print 2 squish fidget .bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.46 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.43 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a squishy fidget toy made from 24 oval plates clamped together. +PRUSA MINI SUITABLE!!!
- Rating
- 3.667 / 5
- Likes
- 74
- Downloads
- 722
- Makes
- 4
- Views
- 3,952
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — NoDerivatives
This is a squishy fidjet toy made from 24 oval plates clamped together.
If you're looking for a smaller one: https://www.printables.com/model/1176641-squish-fidget
All necessary parts even fit on a prusa mini.
For the assembly of the small Squish fidget (24 pcs.) you have to put together:
-4 plates with four holes,
-4 plates with six holes,
-4 plates with seven holes
-8 plates with eight holes
-4 plates with nine holes.
or
-print all three included .gcode files
(Sometimes the different parts are a bit difficult to put together but with a little force it fits)
Watch out to put the parts together in the right symmetrical shape. As shown in the picture:
Printmaterial:
I used PLA (but PETG should work too)
Settings: 100% infill
0.20 mm layerhight
Supports: none
Printer:
Prisa mini +
Printtime:
ca. 4h 30 min
------- HAPPY PRINTING :-) ------