LXCHARGER H65AC XT30 end cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LXCHARGER H65AC end cap with cutout for the XT30PW-M
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 15
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The LXCHARGER H65AC (PCB marking LX-H65ACL) (~20-96V input 65W USB-C charger) has footprints for both an XT30 and a barrel jack. At least on mine, only the barrel jack was populated and exposed through the end cover.
I thought running >30V through the barrel jack was sketchy, so I removed the barrel jack, populated the XT30PW-M footprint on the PCB and designed a new end cap for the case.
Be sure to clip the XT30 leads before soldering so the PCB still fits the case. After soldering scrape off excess solder and cover the exposed contacts/solder with Kapton tape so they don't short out.
OpenSCAD source in https://github.com/patagonaa/solar-system/tree/main/cad/lxcharger-end-cap