1 / 2
Fractal Design - Define 7 XL - PCI shroud (No supports required) — image 1
1 / 2

Fractal Design - Define 7 XL - PCI shroud (No supports required)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A shroud designed to redirect light and noise from the PCI slots off to one side of the case.

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
454
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I run an Unraid server inside a Fractal Design Define 7 XL. My drives are connected to a PCI-E SAS adapter which unfortunately has a bunch of green LED's which can't be disabled.

This system runs in the same room I sleep in, so the light emitted from the SAS adapter tends to illuminate the room.

This shroud is designed to negate this by absorbing much of the light (if printed in a non-green colour, such as Black) and to redirect it off to the right-side of the case (when the case is viewed from the rear).

A large gap ensures that airflow from GPU's and other PCIE devices can still escape, though as with any redirection of airflow, usage of this shroud may cause temperatures to increase.

The shroud is designed to be attached with magnets, and 2 slots for ND magnets measuring up to 60 x 13 x 3 mm have been integrated. These are aligned with the area above the vertical PCI brackets of the case, and directly across it.

Due to the nature of this device, it is unsuitable for servers where external cables are connected to PCIE devices (e.g. monitors), unless you are using angled or very low-profile connectors.

The printed one shown in the photos was printed on:

  • Bambulab X1C
  • 0.4mm
  • Elegoo Rapid PETG (Black)
  • No supports required

Tags