Multiboard boxes for Luxorparts Pro 60 W soldering station
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.90 – €3.55 net (excluding VAT)
For file: Soldering iron lid PLA_0.4n_0.2mm_PLA_MK4IS_2h34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.22 excluding VAT (range midpoint).
- Weight reported by the author
- 54 g
- Print time reported by the author
- 2.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
To cover the soldering station and get it out of the way when not in use
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Two boxes to hang a Luxorparts Pro 60 W soldering station on a Multiboard wall. It consists of a box for the power unit and another box for the soldering iron.
The boxes have cutouts for the cords going between the iron and power unit, and the lids have rails to cover as much of those cutouts as possible.
NB! Let the soldering iron cool down before putting it into the box. :)
Use Multipoints to hang the boxes onto. I used bolt locked multipoints with heavy weight bearing snaps and T-bolts:
Bolt-Locked Insert - Multipoint - 3D model by Multiboard on Thangs
Heavy Weight-Bearing Hook Snap - 3D model by Multiboard on Thangs
9 mm Small Thread, Flat Head, T-Bolt - 3D model by Multiboard on Thangs