Gymnastics Wedge for Stretching – Printable in Two Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This gymnastics wedge with an 18-degree angle is perfect for stretching your calf muscles or shoulders.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 150
- Makes
- 0
- Views
- 700
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Check out my newly designed add on, which adds 9 additional degrees to the wedge! :)
Design & Features
18-Degree Angle
Two-Part Assembly: Designed to be printed in two pieces and easily snapped together without glue, ensuring compatibility with smaller print beds.
Textured Surface: The wedge features a grooved surface for enhanced grip and stability during use.
Highly Sturdy: The wedge is designed to be extremely stable and durable, ensuring reliable support during exercises.
Dimensions: 31 cm (L) × 10.1 cm (H) × 15 cm (W)
Print Settings & Recommendations
Base Profile: PrusaSlicer 0.25 mm Structural Preset, adjusted to 0.3 mm layer height.
Perimeters: 5 perimeters used, but 4 or even 3 perimeters should be sufficient.
Infill: 17.5% adaptive cubic infill for a solid yet efficient structure.
Brim: Initially printed without a brim, but I recommend a 10 mm brim for both parts to avoid warping, especially for open printers.
Print Time & Material: On a Prusa MK4S, the wedge prints in a little over 24 hours and requires approximately 780 g of PETG filament.
Cost & Value
Using a budget PETG filament, printing this wedge is still more affordable than buying a commercial alternative on Amazon. The included G-code & 3mf already feature the improvements I would implement in my next print.
I’d love to see your prints and hear your feedback! 😊