1 / 5
Yamaha Amplifier Lamp Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I did a LED conversion on my Yamaha CA-810 Amplifier and needed new Lamp Holders. Fits 5mm LED Bulbs.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 1
- Views
- 57
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Since the amp originally has normal light bulbs wired in series, it is proned to fail.
You will need 4 of the LED Holders and plug them on the prongs.
The holes for the LED pins need to be drilled with a 1mm drill.
Be aware of the correct orientation of the LEDs. The current limiting resistance also needs to be changed. I used two 1.7k Ohm Resistors instead of the old ones.
Some amplifiers dont have DC voltage for the bulbs! You will need to add a rectifier.
Printed with generic PLA and 100% infill.