1 / 5
Soap dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soap dispenser bottle
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print settings:
- Perimeters: 4
- Solid layers Top / Bottom: 5 / 5
- Scarf joint placement: Contours
- Material: PETG
Optional Modifier:
- Range 0.00-141.00 mm
- Fuzz skin:
- Outside walls
- point distance: 2mm
- thickness: 0.1 mm
- Fuzz skin:
Required hardware: soap dispenser pump 28-400 (bottle neck: diameter 25 mm with one thread).
I printed the soap dispenser bottle (SoapDispenser.stl) with pure PETG, so the bottle is partially transparent. The pump was reused from a disposable soap dispenser.
Attached you will find:
- SoapDispenser.stl - capacity about 500ml;
- SoapDispenser_300.stl - capacity about 300ml;
- ThreadTestSP28400.stl - test piece to check fitting with soap dispenser pump.