Convoy 3x21D handle with switch actuator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handle for the Convoy 3x21D flashlight that allows one-handed operation.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a handle for the Convoy 3x21D flashlight that allows single-handed operation and prevents conduction of heat from the flashlight body to the users hand.
I strongly recommend using a heat-resistant filament. I used Overture ASA; PETG might work. If printing in ASA, I recommend scaling the model up by 0.5%.
The bores for the switch plunger need to be reasonably smooth to keep the switch from binding. If your plunger doesn't move freely, try cleaning the bores with a 23/64 (handle) and 7/16 (yoke) drill bit.
Hardware required:
4x M3x5mm button head cap screws
2x ¼-20 x 3/8 button head cap screws