Canvas holder hook Leinwandhalter für Wand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall hook/ holder for different thicknesses of canvas frames. Simply fix the hook with nails in plastering wall.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
I wanted to mount a canvas picture on the wall. The problem was that I had no hooks and also wanted to avoid damaging the canvas. Nails for example could intrude from the back…
So here is the canvas holder!
Available in different thicknesses for different canvas frames.
Regarding thickness measurement consider that the fuzzy skin roughly causes -1mm in inside width dimension.
The fuzzy skin on the inside surfaces of the hook prevents the canvas from sliding horizontally (as 3D printed surface are usually quite smoothish).
Mount with nails of 2…2.5mm diameter.
Print settings:
- no supports needed as the holes are tiny.
- layer hight 0.2mm
- fuzzy skin on the inside walls to prevent sliding (optional)