1 / 4
Small hanging shelf for a modem/router
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small 240x125mm shelf for a router or modem that can be hung on a 19mm wide ledge.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 113
- Makes
- 0
- Views
- 1,045
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Small 240x125mm shelf for a router or modem that can be hung on a 19mm wide ledge.
You'll need 4x M3 square nuts and 4x M3x8 or 4x M3x10 screws; grab them from the printer's spare bag if you still have it.
Installation:
Put the nuts into the hooks' holes; if they don't fit, use the screw pulling technique just like you did while assembling your MK3S printer. Stick all parts together, tighten the screws and hang the assembled shelf anywhere you like.
Dimensions:
- shelf - 240x125mm
- hook width - 19mm
Print settings:
- 0.30mm layer
- 20% infill
- PLA, PETG or any other non-flexible material you like