1 / 2
Adjustable Filament Shelf (Clas Ohlson Remix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A filament shelf that uses the metal rods and screws from Clas Ohlsons "Justerbar Skohylle I Metall".
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A filament shelf that uses the expandable rods and screws from Clas Ohlsons "Justerbar Skohylle I Metall" (44-3949) or Skohylla ställbar, metall if you are in Sweden. At 250 NOK/200 SEK it is a relatively cheap and quick way to get hold of a set of metal rods and screws.
Designed for Bambu Lab 256x256 build plates but fits the standard Prusa as well. The inserts for the smaller rods were printed in TPU but have good clearance so will probably work in all common materials.
Print Settings:
| Material | Any (Models tested in PETG and PLA with inserts in TPU) |
| Layer Height | 0.20mm |
| Nozzle Size | 0.4mm |
| Supports | No Support, No Brim |
Design/remix ideas:
- Combine base and floor cross (needs to be adjusted so it fits a regular printer).
- Make the two models half size in the overlapping areas so that the components stack in a straight line.