Kochlöffel Ablage
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.16 – €3.86 net (excluding VAT)
For file: Ablage Kochlöffel.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.51 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 2.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Kochlöffel Ablage
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 68
- Makes
- 0
- Views
- 162
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Es gibt zwar schon einige dieser Ablagen,
aber ich habe nie die Richtige gefunden.
Ich habe sie in drei verschiedenen Versionen entworfen:
V1: Grundfläche ca.: 100 x 140 mm, recheckig, für kleinere Arbeitsflächen
V2: Grundfläche ca.: 100 x 180 mm, recheckig, für Leute mit mehr Platz
V3: Grundfläche ca.: 150 x 200 mm, recheckig mit runder Abtropffläche
V1 und V2 habe ich schon selber gedruckt und sie haben sich gut bewährt.
V3 habe ich bis jetzt noch nicht selbst genutzt, obwohl sie mir optisch am besten gefällt.
Sollte sich dies noch ergeben, werde ich das hier natürlich updaten.
Deshab würde ich mich über ein Bild freuen, falls jemand diese Version
ausprobieren möchte.
Viel Spass !!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Although there are already some of these deposits,
but I never found the right one. I designed them in three different versions:
V1: Base area approx.: 100 x 140 mm, rectangular, for smaller work surfaces
V2: Base area approx.: 100 x 180 mm, rectangular, for people with more space
V3: Base area approx.: 150 x 200 mm, rectangular with round draining board
I have already printed V1 and V2 myself and they have proven themselves well.
I haven't used V3 myself yet, although I like the look of it best.
If this happens, I will of course update it here.
That's why I would be happy to see a picture if anyone has this version would like to try out.
Have fun !!