1 / 1
Anycubic Kossel 15.5mm IMU Mount and Drill Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for generic 15.5mm IMUs for the Anycubic Kossel. Done as part of a Klipper retrofitting project.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
A mount for generic 15.5mm IMUs for the Anycubic Kossel. Done as part of a Klipper retrofitting project.
Takes M3 screws along with an M3 tap.
Go slow when drilling and tapping. Taps break very easily. You will likely want to use separate drills and taps. You can change the hole size in FreeCAD to match the diameter of whatever drill bit you are using if you aren't using combo drill+taps.
I use this IMU: https://www.aliexpress.us/item/3256807321107101.html