Steamboat Willie - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my third treatment of Steamboat Willie, a HueForge print.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 37
- Makes
- 1
- Views
- 196
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my third treatment of Steamboat Willie. Steamboat Willie was Walt Disney's first distributed film, released in 1928. It was a hit, and started Disney on his journey. While Steamboat Willie has been considered the forerunner of Mickey Mouse, Mickey Mouse was actually created first, though not yet released.
This model was generated using HueForge. The filaments I used to make this:
HS-PLA Creality Black Transmission Distance: 0.2
HS-PLA Inland dark gray Transmission Distance: 4.5
SILK-PLA Inland Gray Transmission Distance: 2.5
PLA Sunlu White Transmission Distance: 7.1
The 3mf file included here has the filament changes, and the layer and infill parameters set. It's set up for a Creality K2 Plus and CFS, but should work fine with a Bambu (Bambu 3mf's work fine for me).
If you're using the STL:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to dark gray
At layer #11 (0.96mm) swap to Gray
At layer #15 (1.28mm) swap to White for the rest.
Enjoy, and please post makes!