1 / 1
RatRig VCore 3 Open Front Motors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Open Front, Gates Idlers, 5mm Pins
- Rating
- 4 / 5
- Likes
- 9
- Downloads
- 37
- Makes
- 1
- Views
- 1,799
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This modification contains motor blocks for an open front type RatRig printer where two sets of metal plates are used for support and rigidity instead of printed parts.
Spacing is based on using Gates idlers, as per 8Complex modification.
5mmx45 pins are used instead of cap head bolts for the idlers.
BOM
4x 5mmx45 pins/dowels (for idlers)
8x M3x40 cap head screws (for motors)
8x M6x12 cap head screws (for top pin supports/plates)
Gates Idlers/shims as per 8Complex mod.