1 / 1
Dragon ball Z - Broly - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Broly PrusaSlicer version
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 29
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA Black
- ERYONE PLA Filament Green
- Polymaker PolyTerra PLA Fossil Grey
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #9 (0.8mm) swap to Green
- At layer #15 (1.28mm) swap to Grey
- At layer #18 (1.52mm) swap to White for the rest.